正规网赌app盘口

Welcome to the official website of Qidong Jiasheng High Pressure Oil Pump Co., Ltd.!

National Advisory Hotline

152 5133 8222
139 0628 5877

斜盘式柱塞泵

categories of news

Product Categories

hot key words

contact us

Company Name: Qidong Jiasheng High Pressure Oil Pump Co., Ltd.

Contact: Mr. Shen

Phone: 0513-83686166

Mobile: 15251338222

13906285877

Email: 525473742@qq.com

Fax: 0513-83688099

Address: No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

Website: woxinkeji.com

Gear pump is an older design

Your current location : Home >> News >> FAQ

Gear pump is an older design

作者: Release Date: 2019-06-19 Author: Click:

- 是偏心转子设计,由两个转子组成,一侧比另一侧有多的叶片- 在现代车辆中为常见。 Gear pumps are an older design, and the rotor -an eccentric rotor design, consisting of two rotors with more vanes on one side than the other-is common in modern vehicles. There are also designs that use sliding blades on the rotor, as well as a dry oil pan refueling system that cleans the oil pan and relies on a pair of oil pumps to keep the entire rotating assembly lubricated. Each type of pump pushes the oil through the engine's oil filter, and then pushes it up to the top through the motor. The oil pump motor drops back down into the oil pan again. Some pressure valves are opened so that the oil does not pass through a component that may damage the internal components. Check the fuel pump piston. Remove the pressure adjustment connector from the fuel pump. If the piston is stuck in the closed position, no fuel is supplied to the combustion chamber. If the piston is stuck in the open position, fuel will be continuously discharged into the combustion chamber. On a cleaner with a fuel tank above the pump, fuel will begin to drain from the now open pump. A clamp or a pair of clamps can be clamped on the fuel line to reduce or stop this siphon effect. Next remove the drain connection from the fuel pump. Inside and between the two parts is a piston that closes and controls the fuel flow. It is also a spring that controls the fuel pump pressure. Penetrated into the spring is a metal disc that absorbs tension on the spring from the adjustment screw. Use a pair of hemostats to remove the metal disc and spring from the adjustment side.

油泵电机组


URL of this article: http://woxinkeji.com/news/433.html

Keywords: oil pump unit manufacturers , oil pump unit wholesale , oil pump unit price

Recently Viewed:

    16.jpg

    Scan attention

    Service Hotline:

    15251338222/13906285877

    Landline:

    0513-83686166

    company address:

    No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

    record number:

    Su ICP No.19015937

    fax:

    0513-83688099

    mailbox:

    525473742@qq.com

    真人买彩票澳门 现金滚球网站 真钱扑克平台盘口 澳门真人买彩票网站 现金滚球游戏平台 真钱滚球娱乐 葡京正规直营合法赌城 赌场永利盘口 老葡京线上赌博 皇冠真人赌城赌场