正规网赌app盘口

Welcome to the official website of Qidong Jiasheng High Pressure Oil Pump Co., Ltd.!

National Advisory Hotline

152 5133 8222
139 0628 5877

斜盘式柱塞泵

categories of news

Product Categories

hot key words

contact us

Company Name: Qidong Jiasheng High Pressure Oil Pump Co., Ltd.

Contact: Mr. Shen

Phone: 0513-83686166

Mobile: 15251338222

13906285877

Email: 525473742@qq.com

Fax: 0513-83688099

Address: No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

Website: woxinkeji.com

common problem

Your current location : Home >> News >> FAQ
  • Gear pump is an older design

    Gear pumps are an older design, and the rotor-an eccentric rotor design consisting of two rotors with more vanes on one side than the other-is common in modern vehicles. There are also designs that use sliding blades on the rotor, as well as a dry oil pan refueling system that cleans the oil pan and relies on a pair of oil pumps to keep the entire rotating assembly lubricated. Each type of pump will
    Release time: 2019-06-19 Clicks: 141

  • Is a swash plate piston pump suitable for mobile hydraulic applications

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd. produces swash plate piston pumps for demanding mobile hydraulic applications. Its low noise level, high voltage rating, low weight / performance ratio and wide controller range make it useful for most industrial and mobile applications. The variable displacement pump works according to the swashplate principle and has 9 pistons. The opening and closing of the cylinder cavity is performed by the opening in the control panel.
    Release time: 2019-04-29 Clicks: 156

  • Swash plate type piston pump has the function of a rotary cylinder containing a piston

    In this type of swash plate plunger pump, the axial reciprocating movement of the piston is obtained by swash plate, and the angle of the swash plate is fixed or variable. When the piston barrel assembly rotates, the piston rotates around the shaft, and the piston shoe contacts the surface of the swash plate and slides along the surface of the swash plate. Thanks when rotating
    Release time: 2019-04-27 Clicks: 100

  • Example of a hydraulic swash plate piston pump simulates a test bench

    The swash plate type block is a model of a swash plate mechanism in which an axial piston hydraulic pump and a motor are used to convert a translational motion of a piston into a rotational motion of a drive shaft. The mechanism is a cylinder block or a rotor, a combination of a piston inside, and an angled swash plate. The angular position of the plate is controlled by an actuator, usually a servo cylinder
    Release time: 2019-03-16 Clicks: 187

  • Is the swashplate in a constant state of change during operation?

    Even if an automated backup system is in place, unplanned downtime needs to be avoided, especially in operating facilities. We at Qidong Jiasheng High Pressure Oil Pump Co., Ltd. are determined to find ways to increase reliability and predictability. Our efforts involve predicting variable displacement hydraulic piston pump failures. Catastrophic failures in these pumps often occur when the piston is connected to a swashplate piston pump
    Release time: 2019-03-16 Clicks: 40

  • Rebuilding swashplate piston pumps may cause component wear

    Since there are already 18 indicators displayed on the spectrum, that is, the 9th order harmonics of the new swash plate piston pump, the 9th order amplitude of the baseline reading is subtracted from the 9th order amplitude. Divide the current reading by two. Subtract the 18th order of the baseline reading from the 18th order of the current reading. Now subtract the 9th order conclusion from the 18th order conclusion. If the calculated rate of change exceeds 0.0
    Release time: 2019-03-16 Clicks: 18

  • Where does the mechanical power loss of hydraulic swash plate piston pumps come from

    The mechanical power loss of the hydraulic swash plate piston pump comes from the friction between the relatively moving parts, and wear is one of the failure mechanisms of the top pump. Reducing friction and preventing wear require enhanced lubrication, which can be achieved through proper surface texture design. The cylinder length is an important factor affecting the lubrication performance of the piston and cylinder system in the swash plate pump. We start
    Release time: 2019-03-16 Clicks: 19

16.jpg

Scan attention

Service Hotline:

15251338222/13906285877

Landline:

0513-83686166

company address:

No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

record number:

Su ICP No.19015937

fax:

0513-83688099

mailbox:

525473742@qq.com

真人买彩票澳门 现金滚球网站 真钱扑克平台盘口 澳门真人买彩票网站 现金滚球游戏平台 真钱滚球娱乐 葡京正规直营合法赌城 赌场永利盘口 老葡京线上赌博 皇冠真人赌城赌场