正规网赌app盘口

Welcome to the official website of Qidong Jiasheng High Pressure Oil Pump Co., Ltd.!

National Advisory Hotline

152 5133 8222
139 0628 5877

斜盘式柱塞泵

categories of news

Product Categories

hot key words

contact us

Company Name: Qidong Jiasheng High Pressure Oil Pump Co., Ltd.

Contact: Mr. Shen

Phone: 0513-83686166

Mobile: 15251338222

13906285877

Email: 525473742@qq.com

Fax: 0513-83688099

Address: No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

Website: woxinkeji.com

Company news

Your current location : Home >> News >> Company News
  • Seals for lubrication and clutch cooling

    Increasing demand for increased driving levels (eg, the effectiveness of the drivetrain, increased driving comfort), and the search for significant reductions in emissions and fuel consumption (possible blending) is strongly pointing to a future increase in vehicles with automated manual transmissions. No matter what type of transmission (manual transmission, dual clutch transmission, automatic transmission, no transmission), electric pump
    Release time: 2019-06-23 Clicks: 32

  • Oil pump motor piston should be oiled

    If the piston is successfully removed without damage, the piston bores need to be cleaned before reassembly. A simple method of cleaning piston holes involves using an oiled shotgun hole brush. A .410 gauge shotgun hole brush made of soft metal is but a nylon brush is ideal. Insert this oiled brush into the piston hole and push the brush into the hole. Pull the brush out of the hole in each direction and
    Release time: 2019-06-21 Clicks: 42

  • Pump failure or lack of oil caused a drop in oil pressure

    Many compressors are mechanically lubricated by a pump. If the oil pressure drops due to a pump failure or lack of oil, they will fail. Where an oil pump is used, a cut is provided which will stop the compressor if the oil pressure is insufficient. Oil pump motor unit This takes the form of a differential pressure switch with start-up time. Because the oil pump inlet is at the pressure of the fuel tank (suction), the
    Release time: 2019-06-14 Clicks: 68

  • Our newly developed plunger pump piston using liquid analysis technology

    This swash plate type plunger pump series product can provide excellent pump efficiency even in the low and medium pressure range, and has excellent control performance in a compact housing. Qidong Jiasheng High Pressure Oil Pump Co., Ltd. achieves this by adopting the newly developed plunger pump piston, cylinder and other rotating parts using liquid analysis technology.
    Release time: 2019-05-07 Clicks: 30

  • What are the consequences of a defective oil pump unit

    When your oil pressure light is on, you can bet for one reason. It could be something simple, such as low oil prices, or it could be a sign of a serious engine problem. The trouble is, you don't know whether the problem is serious or not, so your better practice is to stop and shut down your engine immediately. This is because if your oil pressure drops to zero, you may damage you
    Release time: 2019-05-04 Clicks: 23

  • The oil pump motor unit does not generate pressure

    Oil pump motor manufacturer Qidong Jiasheng High Pressure Oil Pump Co., Ltd. finishing: One sign of failure may be a flashing oil pressure warning light or a low oil pressure reading on the meter. If the warning is not noticed or ignored, the next clue to the problem may be a valve click because the hydraulic tappet or lash adjuster lacks oil and draws air. If driving
    Release time: 2019-05-02 Clicks: 30

  • Oil pump motors are usually made of high quality alloy steel

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd. provides appropriate high pressure oil pump motor units. Triaxial pumps like this, crane pumps, etc. The method of selecting the correct combustion boiler oil pump depends on the condition of the conveying medium in the pump and the working pressure. The idea of using diesel and high-pressure pump oil first, but the selection of sm screw pump or 3gr screw pump, the viscosity of using diesel and diesel is lower, because
    Release time: 2019-04-20 Clicks: 21

  • Why not use an oil pump under overload

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd., a manufacturer of oil pump motors, advises against using the oil pump under overload conditions. The safety valve needs to adjust the pressure according to the fixed oil pressure of the device to prevent the adjustment of the safety valve. The oil pump casing needs to have a ground wire power supply and a ground wire, and the insulation status of the wiring can be confirmed before starting operation. When trying to use a fuel sprayer, please put
    Release time: 2019-04-17 Clicks: 23

  • Diagnostic program for inclined axis variable displacement piston pump

    The diagnostic program of the inclined axis variable piston pump: 1. Our oil is clean during use. Please note that it is correctly assembled, mainly the performance and life of the inclined axis variable piston pump. 2. After the charger is filled with gas to avoid danger, all parts will not start or lock the tire for no reason. 3. First discharge the compressed gas filled in the battery, and then transport or load it again. 4.Air pressure
    Release time: 2019-04-15 Clicks: 23

  • Our oblique-shaft variable piston pumps are compact

    The slant-shaft variable piston pump produced by our company has a compact structure, simple operation, and a limited number of moving parts. They cannot match the pressure generated by a reciprocating pump or the flow rate of a centrifugal pump, but provide higher pressure and throughput than vane or cam pumps. This pump is especially suitable for pumping oil and other high viscosity fluids. In both designs, I
    Release time: 2019-03-16 Clicks: 37

  • It is important to ensure that the operating temperature range is compatible with the pump specifications

    Geared oblique-shaft variable piston pumps are self-priming and can be raised dry, although their starting characteristics will increase if the gears are wetted. Gears need to be lubricated with the pumped liquid and should not dry for long periods. Some gear pump designs can operate in either direction, so for example the same pump can be used to load and unload containers. & n
    Release time: 2019-03-16 Clicks: 30

  • What is the main application of the inclined axis variable piston pump

    Despite better precautions, geared slant-shaft variable piston pumps usually succumb to the wear of gears, sleeves and bearings over time. As the gap increases, the efficiency gradually decreases and the flow slip increases: the pumped fluid leaks from the discharge port back to the suction side. The flow slip is proportional to the cube of the gap between the gear teeth and the housing, so, in practice, wear
    Release time: 2019-03-16 Clicks: 677

  • How plunger pumps meet the requirements of different hydraulic systems

    Manufacture of different inclined shaft variable piston pumps to meet the different requirements of different hydraulic systems. In practice, this means that the correct pump for one system or purpose may not be suitable for another system or purpose. This type of hydraulic pump we provide as described below. If you need us to build
    Release time: 2019-03-15 Clicks: 86

  • Do not allow the oil pump motor to work under overload

    Two sealed spaces are formed in the two spaces of the oil pump body and the front and rear covers. The rotating gears and the space for gear disengagement have increased from small to large, vacuum, liquid, and high pressure. The fuel pump sucks the fuel in the truck parked on the road. The filler will be consumed if it is used for a long time, because the push rod will loosen.
    Release time: 2019-03-15 Clicks: 35

  • What are the important parts to keep the engine running

    Welcome to Qidong Jiasheng High Pressure Oil Pump Co., Ltd. oil pump motor assembly page. You can find various fuel pumps, fuel pump assembly parts and other related components here. We provide fuel pump module assemblies, fuel pumps and complete fuel pump assemblies for your car. The following information will help you make the decision when considering using a new fuel pump for your car
    Release time: 2019-03-15 Clicks: 34

  • How to choose your own suitable variable displacement plunger pump model

    Do I need to pay attention if I choose the right type of variable displacement plunger pump? Have any questions to consider? Attentions in the selection of our slant-shaft variable piston pumps: 1. Determine the flow range required by itself. Considering the proper margin range, the plunger pump model is the appropriate flow. 2. Determine the appropriate pressure level. The pressure level is 2.0 ~ 2.
    Release time: 2019-03-15 Clicks: 46

16.jpg

Scan attention

Service Hotline:

15251338222/13906285877

Landline:

0513-83686166

company address:

No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

record number:

Su ICP No.19015937

fax:

0513-83688099

mailbox:

525473742@qq.com

真人买彩票澳门 现金滚球网站 真钱扑克平台盘口 澳门真人买彩票网站 现金滚球游戏平台 真钱滚球娱乐 葡京正规直营合法赌城 赌场永利盘口 老葡京线上赌博 皇冠真人赌城赌场