正规网赌app盘口

Welcome to the official website of Qidong Jiasheng High Pressure Oil Pump Co., Ltd.!

National Advisory Hotline

152 5133 8222
139 0628 5877

斜盘式柱塞泵

Company Overview

Product Categories

hot key words

contact us

Company Name: Qidong Jiasheng High Pressure Oil Pump Co., Ltd.

Contact: Mr. Shen

Phone: 0513-83686166

Mobile: 15251338222

13906285877

Email: 525473742@qq.com

Fax: 0513-83688099

Address: No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

Website: woxinkeji.com

Label: Variable shaft plunger pump

Your current location : Home >> Tag Search
Inclined shaft variable plunger pump introduces the product classification of inclined shaft variable plunger pump in detail, including the use, model, range, picture, news and price of all products under the inclined shaft variable plunger pump . At the same time, we have also selected for you the industry information, price quotes, exhibition information, picture information, etc. of the slant-shaft variable piston pump classification.
  • [ Industry News ] Inclined shaft variable piston pumps are considered high pressure components

    One thing you can see is that the area of a 4-inch piston is 12.56 square inches. If the pump generates a pressure of 3,000 pounds per square inch (psi), the total available pressure is 37,680 pounds, which is about 2,320 pounds at 20 tons. Another thing you can do is piston time. So you need to pump out 1.5 gallons of oil to push the piston towards
    Release time: 2019-07-29 Clicks: 23

  • [ Industry News ] Diagnosed several oblique axis variable piston pump failures

    Increase in fluid velocity. The fluid speed is inversely proportional to the size of the hydraulic line. You may have noticed that the suction line of most pumps is larger than the pressure line. This is to keep the inlet speed low so that oil can easily enter the pump. For example, a blocked suction filter or filter can cause the pump to cavitation. A contaminated suction filter is the cause of cavitation because it is located below the oil level in the tank. in spite of
    Release time: 2019-07-26 Clicks: 24

  • [ Industry News ] Production of hydraulic components for mobile and industrial machinery

    Manufacture of hydraulic components and systems for mobile and industrial machinery. These pumps, valves, motors and power units. Products include high-pressure piston pumps, high-pressure directional and pressure control valves, heavy-duty piston motors for demanding conditions, and electro-hydraulic actuators for remote control. Standard hydraulic power units or systems are also built for demanding conditions such as high pressure and fluids. Cavitation is liquid hollow
    Release time: 2019-07-24 Clicks: 38

  • [ Industry News ] The upper plug in the housing of the inclined axis variable piston pump

    However, this does not mean that the overflow housing piston pump needs no attention during pre-start. Imagine a device with a head of 3 feet or 1 meter above the hydraulic pump, a diameter of 4 inches or 100 mm, and a length of 1 meter. The hydraulic pump's case volume is approximately 1 gallon or 4 liters. Now imagine that you just changed this water-filled casing pump, so the air intake
    Release time: 2019-07-22 Clicks: 19

  • [ Industry News ] How to find the location of the installation of the inclined shaft variable piston pump

    The hydraulic pump and prime mover are located next to and below the bottom of the tank (approximately 12 "); the overflow inlet design. There are no restrictions other than the ball valve at the tank port. And" it depends "because there are always many possible variables required Consider. In the above case, we are considering a piston type hydraulic pump with an "overflow inlet". Overflow inlet means the pump inlet
    Release time: 2019-07-19 Clicks: 53

  • [ Industry News ] What to do if there is no indicator on the pump

    How do you know that the compensator is actually set to 800psi? If there is no indicator on the pump, can you actually measure the flow (install a flow meter at the outlet of the oblique-shaft variable piston pump) or can you calculate an approximate flow? If the compensator is actually set to 800psi and works fine,
    Release time: 2019-05-26 Clicks: 6

  • [ Industry News ] What determines the displacement of the oblique axis variable piston pump

    The angle of the swash plate determines the displacement of the oblique-shaft variable piston pump. The swash plate pivots on the shaft, which is at right angles to the pump shaft. The swash plate is pushed to a large or small angle by the action of a spring and a small hydraulic actuator: depending on the size and size of the pump, it can be a cylindrical or vane type rotary actuator. & n
    Release time: 2019-05-23 Clicks: 33

  • [ Industry News ] We built several pump models

    The geometric solid model of the oblique-shaft variable piston pump is used to generate a "negative image" of its unfilled holes and spaces, giving the void volume and removing the pump components. Therefore, the actual fluid volume is extracted from the original model. The model approximates the physical model of a working pump. In fact, the cylindrical pump body holds seven
    Release time: 2019-05-16 Clicks: 37

  • [ Industry News ] Where is the typical leakage position of the inclined shaft variable piston pump

    The hydraulic fluid produced by the hydraulic pump overcomes the resistance created by the load. There are several types of hydraulic pumps. Piston pumps can be divided into axial flow pumps and radial pumps. The axial piston pump may have a swash plate or a curved shaft pump with a variable swash plate angle.
    Release time: 2019-05-14 Clicks: 46

  • [ Industry News ] What are the hydraulic motor pump series

    The electric hydraulic pump produced by Qidong Jiasheng High Pressure Oil Pump Co., Ltd. provides solidity, high performance and economy. The use of newer metallurgical, bearing and sealing technologies to produce hydraulic electric pumps has far more features and advantages than currently available high pressure electric pumps. Benefits: Lightweight design with integrated handle and strap for easy portability; storage protects against contamination, and
    Release time: 2019-03-21 Clicks: 25

  • [ Company News ] What is the main application of the inclined axis variable piston pump

    Despite better precautions, geared slant-shaft variable piston pumps often succumb to wear on gears, sleeves and bearings over time. As the gap increases, the efficiency gradually decreases and the flow slip increases: the pumped fluid leaks from the discharge port back to the suction side. The flow slip is proportional to the cube of the gap between the gear teeth and the housing, so, in practice, wear
    Release time: 2019-03-16 Clicks: 679

  • [ Company News ] It is important to ensure that the working temperature range of the tube is compatible with the pump specifications

    Geared oblique-shaft variable piston pumps are self-priming and can be raised dry, although their starting characteristics will increase if the gears are wetted. Gears need to be lubricated with the pumped liquid and should not dry for long periods. Some gear pump designs can operate in either direction, so for example the same pump can be used to load and unload containers. & n
    Release time: 2019-03-16 Clicks: 31

  • [ Company News ] The oblique-shaft variable piston pump we produced is compact

    The slant-shaft variable piston pump produced by our company has a compact structure, simple operation, and a limited number of moving parts. They cannot match the pressure generated by a reciprocating pump or the flow rate of a centrifugal pump, but provide higher pressure and throughput than vane or cam pumps. This pump is especially suitable for pumping oil and other high viscosity fluids. In both designs, I
    Release time: 2019-03-16 Clicks: 38

  • [ Industry News ] Piston pumps are complex and have high manufacturing requirements

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd.'s swash plate 3 of the inclined shaft variable piston pump uses the movable shaft 1 to rotate the cylinder 4 so that the cylinder 2 and the oil cylinder 5 are fixed. Under the action of the device or low-pressure oil, the grip angle of the cylinder shaft rotates in the γ direction. If the cylinder turns to the left, the start chamber is
    Release time: 2019-04-08 Clicks: 30

  • [ Industry News ] The characteristics of oblique-shaft variable piston pumps are as follows

    The A1VO Axial Gate designed by Qidong Jiasheng High Pressure Oil Pump Co., Ltd. is suitable for the field of small-scale oblique-shaft variable piston pumps, which can reduce fuel consumption by 10,000 watts during the use of 16,000 watts. The metering pump provides an economical and efficient alternative, and first realizes the economic conversion designed by the universal exchange center. Simulation experiments prove that in mixed use
    Release time: 2019-04-04 Clicks: 23

  • [ Company News ] How to choose your own suitable variable displacement plunger pump model

    Do I need to pay attention if I choose the right type of variable displacement plunger pump? Have any questions to consider? Attentions in the selection of our slant-shaft variable piston pumps: 1. Determine the flow range required by itself. Considering the proper margin range, the plunger pump model is the appropriate flow. 2. Determine the appropriate pressure level. The pressure level is 2.0 ~ 2.
    Release time: 2019-03-15 Clicks: 46

  • [ Industry News ] Why axial piston pumps have multiple pistons

    An oblique-shaft variable piston pump is a cylinder with a plurality of positive displacement pumps in an inner circular array. It can be used as a stand-alone pump, hydraulic motor or automotive air conditioning compressor. Axial piston pumps have multiple pistons (usually odd numbers) that are arranged in a circular array inside a housing, which is often referred to as a cylinder block, rotor, or barrel. The cylinder block is driven around it by the integral shaft
    Release time: 2019-04-04 Clicks: 62

  • [ Industry News ] What are the two types of variable axial piston pump

    The connection between the trapped fluid chamber and the pump's discharge port is closed when the piston of the oblique-shaft variable piston pump is at the top of the reciprocation (often referred to as top dead center or TDC only). Shortly thereafter, the same chamber was opened to the pump inlet. As the piston continues to precess about the cylinder block axis, it moves away from the valve plate, increasing the volume of the trapping chamber. When this happens
    Release time: 2019-04-06 Clicks: 74

  • [ Industry News ] Our variable displacement pumps are designed for closed circuit hydrostatic applications

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd. produces a series of inclined shaft variable piston pumps. Our pump range is designed for closed circuit hydrostatic applications and features a solid swashplate and bearing design. It provides controls such as manual levers with feedback, hydraulic proportional and electric proportional. These pumps are available with accessories including hydraulic pressure override, electric shut-off valve and cross-port safety valve to prevent pressure
    Release time: 2019-04-06 Clicks: 68

  • [ Industry News ] What industries are inclined-shaft variable piston pumps commonly used for?

    Inclined-shaft variable piston pumps are commonly used in hydraulic drive systems for mechanical, metal, compression, mountain, and electrification machinery. It is mainly composed of cylinder, cylinder, cylinder and cylinder. Therefore, the center line of the pin is parallel to the axis of the moving axis. It is a pump in the axial direction. However, this does not mean that the purpose is to make a reciprocating movement in the pump cylinder, but rather that the rotary movement causes the piston and the pump head to face each other
    Release time: 2019-04-09 Clicks: 67

  • [ Company News ] How plunger pumps meet the requirements of different hydraulic systems

    Manufacture of different inclined shaft variable piston pumps to meet the different requirements of different hydraulic systems. In practice, this means that the correct pump for one system or purpose may not be suitable for another system or purpose. This type of hydraulic pump we provide as described below. If you need us to build
    Release time: 2019-03-15 Clicks: 88

  • [ Company News ] Diagnostic Program of Variable Shaft Variable Piston Pump

    The diagnostic program of the inclined axis variable piston pump: 1. Our oil is clean during use. Please note that it is correctly assembled, mainly the performance and life of the inclined axis variable piston pump. 2. After the charger is filled with gas to avoid danger, all parts will not start or lock the tire for no reason. 3. First discharge the compressed gas filled in the battery, and then transport or load it again. 4.Air pressure
    Release time: 2019-04-15 Clicks: 26

  • [ Industry News ] What are the important characteristics of the inclined axis variable piston pump

    Qidong Jiasheng High Pressure Oil Pump Co., Ltd. uses the high pressure of the pump to control the high precision of the packaging motor in order to change the discharge. The variable-angle rotation circular plate fixed in the axial direction rotates so that it rotates in the axial direction. As the inlet rotates, they are exchanged between the inlet and the outlet. They move at the outlet, draining fluid from the inlet. Cover rotating
    Release time: 2019-04-08 Clicks: 61

    Recommended Products

  • PCY14-1B variable displacement piston pump

    PCY14-1B grading variable column

  • BCY14-1B electro-hydraulic proportional variable displacement pump

    BCY14-1B electro-hydraulic ratio change

  • YCY14-1B variable displacement piston pump

    YCY14-1B grading variable column

16.jpg

Scan attention

Service Hotline:

15251338222/13906285877

Landline:

0513-83686166

company address:

No. 3, Chengdong 1st Road Industrial Park, Huilong Town, Qidong City, Jiangsu Province

record number:

Su ICP No.19015937

fax:

0513-83688099

mailbox:

525473742@qq.com

真人买彩票澳门 现金滚球网站 真钱扑克平台盘口 澳门真人买彩票网站 现金滚球游戏平台 真钱滚球娱乐 葡京正规直营合法赌城 赌场永利盘口 老葡京线上赌博 皇冠真人赌城赌场